base

fhs/arcmond2/external/include/sasbase.h

@@ -0,0 +1,156 @@
+#ifndef _SASBASE_H
+#define	_SASBASE_H
+
+
+#pragma pack(1)
+
+enum _SAS_ATTRIBUTE_ITEMS
+{
+	SAS_READ_RECOVERED_WO_DELAY,	 
+	SAS_READ_RECOVERED_W_DELAY,
+	SAS_READ_RECOVERED_W_RETRY,
+	SAS_READ_RECOVERED,
+	SAS_READ_TOTAL_BYTES,
+	SAS_READ_UNRECOVERED,
+	SAS_WRITE_RECOVERED_WO_DELAY,
+	SAS_WRITE_RECOVERED_W_DELAY,
+	SAS_WRITE_RECOVERED_W_RETRY,
+	SAS_WRITE_RECOVERED,
+	SAS_WRITE_TOTAL_BYTES,
+	SAS_WRITE_UNRECOVERED,
+	SAS_VERIFY_RECOVERED_WO_DELAY,
+	SAS_VERIFY_RECOVERED_W_DELAY,
+	SAS_VERIFY_RECOVERED_W_RETRY,
+	SAS_VERIFY_RECOVERED,
+	SAS_VERIFY_UNRECOVERED,
+	SAS_NON_MEDIUM_ERRORS,
+	TOTAL_SAS_ATTR_ITEMS
+};
+
+enum _SMART_ITEMS
+{
+	SMART_READ_ERROR_RATE_1,	// read error rate
+	SMART_SPINUP_TIME_3,		// spinup time
+	SMART_REALLOCATION_5,		// reallocation
+	SMART_SEEK_ERROR_RATE_7,	// seek error rate
+	SMART_SPINUP_RETRY_10,		// spinup retry
+	SMART_CALIBRATION_RETRY_11,	// calibration retry
+	SMART_TEMPERATURE_194,		// temperature
+	TOTAL_SMART_ITEMS,
+};
+
+enum _SAS_HW
+{
+	SAS_HW_DISK,				// disks
+	SAS_HW_VOLTAGE,				// voltages
+	SAS_HW_FAN,					// fans
+	SAS_HW_POWER,				// powers
+	SAS_HW_TEMPERATURE,			// temperatures
+	TOTAL_SAS_HW
+};
+
+typedef struct sSMART_DATA
+{
+	WORD    smIndex;
+	BYTE    smStatus;
+	BYTE    smThreshold;
+} sSMART_DATA, *pSMART_DATA;
+
+// SCSI attribtes
+typedef struct sSCSI_ATTR
+{
+	BYTE scsiChannel;				// channel for SCSI target (0/1)
+	BYTE scsiId;					// SCSI ID for the volume
+	BYTE scsiLun;					// LUN (0 if target is IDE)
+	BYTE scsiTaggedQueuing;			// 1 --> queue enabled
+	BYTE scsiCacheMode;				// 1 --> Cache enabled
+	BYTE scsiSpeed;					// IDE(0:ATA33/1:ATA66/2:ATA100/3:ATA133)
+} sSCSI_ATTR, *pSCSI_ATTR;
+
+
+typedef struct sGUI_ENC_PROPERTY
+{
+	BYTE	gepVendor[8];			// vendor name
+	BYTE	gepProduct[16];			// product name
+	BYTE	gepRev[4];				// reversion 
+	BYTE	gepEncType;				// enclosure type
+	BYTE	gepEncnumber;			// enclosure#
+	BYTE	gepEncDisks;			// number of disks
+	BYTE	gepEncVoltages;			// number of voltages
+	BYTE	gepEncFans;				// number of fans
+	BYTE	gepEncPowers;			// number of powers
+	BYTE	gepEncTemperatures;		// number of temperatures
+	BYTE	gepRes[0x1D];			// reserved
+} sGUI_ENC_PROPERTY, *pGUI_ENC_PROPERTY;
+
+
+#define	MAX_ENCLOSURES			8
+#define	MAX_PHY_PER_ENCLOSURE	32
+#define	MAX_DEV_PER_ENCLOSURE	32
+
+enum
+{
+	ENC_TYPE_NOT_INSTALLED,			// not installed
+	ENC_TYPE_INTERNAL,				// built-in enclosure
+	ENC_TYPE_SES2,					// ses2
+	ENC_TYPE_SMP,					// smp
+	ENC_TYPE_CTRL					// controller
+};
+
+
+
+#define	MAX_ELEMENT_STR_LEN		24
+#define MAX_SENSORS				32
+
+
+
+// constant of SES element definitions
+// common status
+#define SES_COMMON_STATUS_OK		0x00000001
+#define SES_COMMON_STATUS_CRITICAL	0x00000002
+
+// power
+#define SES_POWER_FAIL				0x40000000
+
+// fan(cooling)
+#define SES_FAN_FAIL				0x40000000
+
+// temperature
+#define SES_OVER_TEMPERATURE		0x08000000
+
+// voltage
+#define SES_OVER_VOLTAGE			0x00000200
+#define SES_UNDER_VOLTAGE			0x00000100
+
+#define SES_STATUS_OK(x)			(x & SES_COMMON_STATUS_OK)
+#define SES_STATUS_CRITICAL(x)		(x & SES_COMMON_STATUS_CRITICAL)
+
+
+typedef struct sELEMENT
+{
+	BYTE	snNumberOfSensors;								// number of elements
+	BYTE	snElementStr[MAX_SENSORS][MAX_ELEMENT_STR_LEN];	// description of elements
+	LONG	snValue[MAX_SENSORS];							// the value of sensor
+	DWORD	snRawValue[MAX_SENSORS];						// the SES RAW value of sensor
+}sELEMENT, *pELEMENT;
+
+typedef struct sDISK_ELEMENT
+{
+	BYTE	snNumberOfElements;								// number of elements
+	BYTE	snElementStr[MAX_SENSORS][MAX_ELEMENT_STR_LEN];	// description of elements
+}sDISK_ELEMENT, *pDISK_ELEMENT;
+
+typedef struct sSENSORS
+{
+	sDISK_ELEMENT   disk;
+	sELEMENT		voltage;
+	sELEMENT		fan;
+	sELEMENT		power;
+	sELEMENT		temperature;	
+	sELEMENT		battery;
+} sSENSORS, *pSENSORS;
+
+
+#pragma pack()
+
+#endif